top of page
part of machine

Our Products

Connectivity That Powers the Future of IoT

In the world of modern IoT, devices succeed or fail based on their ability to communicate. At Edge IoT Technologies, connectivity isn’t an afterthought — it’s the foundation. Our products are built around a full spectrum of communication standards, each selected to match the environment, power profile, and data demands of the application.

 

From ultra-low-power sensors to high-bandwidth edge systems, from dense urban deployments to the most remote corners of the planet, we engineer connectivity that simply works. Whether your solution needs BLE for local interactions, LoRaWAN for long-range efficiency, Wi-Fi for high throughput, cellular for mobility, or satellite for global reach, Edge IoT Technologies delivers the right radio for the job.

 

Because in IoT, one size never fits all — but the right connectivity makes everything possible.

Wired

Wired VT22.png

Wired VT22

  • Cellular LTE CAT-M1 or CAT-1.bis device

  • 8-Pin cable connector

  • GNSS 72 Channel, -167db tracking, w/3 concurrent (GPS, Galileo, GLONASS, BeiDou)

  • 16g accelerometer

  • BLE V5.0

  • Backup battery

  • Standard firmware features

Wired VT26.png

Wired VT26

  • CAT-1.bis (Sequans GC025)

  • 8-Pin cable harness

  • GNSS 72 Channel, -167db tracking, w/3 concurrent (GPS, Galileo, GLONASS, BeiDou)

  • 16g accelerometer

  • BLE V5.0

  • Backup battery

  • Standard firmware features

VTG620.png

Wired VTG620

  • VTG620Rugged sealed enclosure

  • LTE Cat-1.bis or optional LTE Cat-M1

  • BLE 6.0 support, low power consumption

  • Wi-Fi 6 support

  • Integrate high sensitivity GNSS

  • 16g, 6-axis accelerometer + Gyro

  • 2nd 16G, 3-axis high sensitivity accelerometer

  • Temperature & Humidity sensors

  • CAN Bus interface w/J1939 Support

  • Altimeter sensor

  • USB2.0 Interface

  • RS485 Interface

  • 3 input, 1output, 1 ADC

  • Back-up battery

  • SMS, UDP, TCP, FTP & MQTT

  • Integrated cellular, GNSS, Wi-Fi and BLE antenna

  • Over the air configuration and firmware update

  • Extended AT Command set for flexible and easy configuration

OBD

OBD VTC32.png

OBD VTC32

  • VTC32 - OBD LTE CAT-M1 (QC BG95) or CAT-1.bis device (ASR 160xx)

  • OBDII J1962 connector

  • ISO-15765 CAN-FD interface supporting standard PIDs, DTCs + VIN

  • GNSS 72 Channel, -167db tracking, w/3 concurrent (GPS, Galileo,

  • GLONASS, BeiDou)

  • 16g accelerometer

  • BLE V5.0

  • Backup battery

  • Standard firmware features

Battery

Battery Only AT11.png

Battery Only AT11

  • 6,000mAh @ 3V non-rechargeable

  • Battery only operation Asset Trackers

  • Cellular LTE CAT-M1 (QC BG95)

  • GNSS 72 Channel, -167db tracking,  w/3 concurrent

  •     (GPS, Galileo, GLONASS, BeiDou) 

  • 16g  accelerometer

  • BLE V5.0

  • Standard firmware features

Battery AT140

  • LTE Cat-1 bis & 2G

  • Integrated cellular and GNSS antenna

  • Blue LED & Red LED Used to determine the state

  • of the device

  • SMS, UDP, TCP, FTP & MQTT

  • Acceleration sensor is used to check the movement pattern of the device and can be used to judge the transportation mode of the device

  • The barometer can read the ambient pressure of the device and can also assist in determining the flight mode

  • Up to 16 Geo-fences (polygon and circles)

  • Extended AT Command set for flexible and easy configuration

  • Small size and easy installation

  • IP67 Rating

Battery Only AT13.png

Battery Only AT13

  • 5,200mAh rechargeable

  • Battery only operation Asset Trackers

  • Cellular LTE CAT-1.bis options (QC BG95)

  • GNSS 72 Channel, -167db tracking,  w/3 concurrent

  •     (GPS, Galileo, GLONASS, BeiDou) 

  • 16g  accelerometer

Battery Only AT150.png

Battery Only AT150

  • BLE V5.0

  • 15,000mAh @ 3V non-rechargeable

  • Cellular LTE CAT-1.bis  (QC BG95)

  • GNSS 72 Channel, -167db tracking,  w/3 concurrent (GPS, Galileo, GLONASS, BeiDou) 

  • 16g  accelerometer

  • BLE V5.0

  • Standard firmware features

Solar

RTG8000.png

Solar Power RTG8000

  • Rugged sealed enclosure

  • 2 Watt solar panel

  • LTE Cat-1.bis or optional Cat-M1

  • Wi-Fi 6 support

  • Optional Wi-Fi HaLow 900mHz

  • Optional LoRaWan 900MHz

  • BLE 6.0 support

  • NTN Satellite capable

  • Dual Band L1+L5 GNSS

  • 16g, 6-axis accelerometer + Gyro

  • 2nd 16G, 3-axis high sensitivity accelerometer

  • Temperature & Humidity sensors

  • Back-up Rechargeable 5200mAh @ 7.4VDC battery pack

  • Non-rechargeable 19Ah @ 10.8VDC battery pack

  • USB2.0 Interface

  • 1 input, 1output, 1-wire bus

  • 10 year low power design

  • SMS, UDP, TCP, FTP & MQTT

  • Over the air configuration and firmware update

  • Extended AT Command set for flexible and easy configuration

Anchor 1
Anchor 2

Satisfaction Guarantee

A New Kind of IoT Product Realization Partner

bottom of page